Home
About
Contact
News
Machining
Fabrication
3D Printing
Laser
Acrylic Nut & Bolt machined from cast acrylic rod, using the machining techniques of turning, routing and thread cutting. The acrylic is then finished by buffing and hand polishing.
Perspex mould CNC machined on a high speed milling machine. Excellent surface finish. Batch size 1 off.
CNC drilled and routed Perspex panel, printed both sides with silver conductive ink and an over print of matt varnish to stop oxidisation of the silver. Typical batch size 25 off.
Close tolerance acrylic CNC routed Typical batch size 100 off
Share this article
CNC Routed Panel with Silkscreen Printing
CNC drilled and routed Perspex panel, printed both sides with silver conductive ink and an over print of matt varnish to stop oxidisation of the silver. Typical batch size 25 off.
Share this article
MACHINING
CNC Routing - Milling - Turning - Manual Routing - Engraving
Machining Capabilities
6 CNC Routers
• Profiling, engraving, drilling and tapping.
• Spindle speeds up to 60,000 RPM
• Machining area up to 3050 x 2050mm
• Machine traverse speed up to 30m/min
• Up to 11 station tool changers.
• Electronic tool measurement.
• Electronic material thickness compensation (Z-Correction).
New 3050 x 2030mm Multicam Router
• 11 station tool changer
• Spindle speeds up to 32,000 RPM
• Machine traverse speed of 30 m/min
NC Vertical Machining Centre
• 450 x 350 set up for high speed milling with
• 12 station tool changer and high speed spindle, for profiling, drilling and tapping
Full 3D CAD / CAM – Solidworks / Edgecam
Manual Machines:
• Routers
• Lathes
• Drills and tapping heads
• Saws